Description
| Technical Data | D5-SMART |
|---|---|
| Input voltage 1 | 90V – 240V AC +/-10% @ 50Hz |
| Current consumption (Mains) | 200mA |
| Battery charger current output | 1.3A |
| Maximum number of operations per day | 150 |
| Duty cycle – Mains present 2, 3 | 50% |
| Motor voltage | 24V DC |
| Motor power supply 5 | Battery-driven (Standard Capacity – 2x12V) |
| Current consumption (motor at rated load) | 13A |
| Input / Output sink currents (Max accessory current draw) | |
| I/O 1-4 | 100mA (12/24V) |
| I/O 5 and 6 | 3A (12/24V) 10sec Pulse |
| Motor push force – starting | 30kgf |
| Motor push force – rated | 17kgf |
| Gate mass – maximum | 500kg |
| Gate length – maximum | 100m |
| Gate speed (varies with load)4 | 35m/min @ 17kgf |
| Manual Override | Lockable with key release |
| Operations in standby with 2 x 7Ah (28W) battery | |
| Half day 5, 6 | 209 (Power Saving)/ 102 (Normal) |
| Full day 5, 6 | 183 (Power Saving)/ 79 (Normal) |
| Collision Sensing | Electronic |
| Operating temperature range | -15°C to +50°C |
| On-board receiver type | Code-hopping multichannel receiver with selective add and delete |
| Receiver code storage capacity7 | 1500 Remotes |
| Receiver frequency | 433.92MHz |
| Degree of protection | IP55 |
| Mass of unit packed (with standard kit, but excl. rack and battery) | 9.1kg |
| Packaging dimensions (with standard kit, but excl. rack and battery) | 325mm wide x 244mm deep x 445mm high |
1. Can operate off a solar supply
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending
on the requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending
on the requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used
